Pointe Scientific


Pointe 180 Semi-Automatic Clinical Analyzer

The Pointe 180 is a small, semi-automated bench top chemistry analyzer that can read and calculate results of endpoint, initial rate, kinetic rate and batch kinetic assays. The analyzer can use single point calibration by standard/factor, multi-point calibration with point to point curve fit, percent absorbance and rate by standard or factor. It is equipped with graphic software, 37 °C.

Category: POINTE Product ID: 2331

Get a Quote

Technical Specifications

Method: End point, kinetic bichromatic

Measurement Range and Accuracy: 0.0 to 2.50 Absorbance Units (A) +/- (1% of the reading + 0.005 A) at 1.5A +/- (2% of the reading + 0.005 A) at 1.5-2A

Reagent Reaction Temperature: 37°C

Sample: Whole blood, serum, plasma

Light Source: Tungsten halogen lamp with lamp-saver feature

Wavelengths: 6 filter wheel (340-600 nm)

Filter Type: Multiple-cavity sealed interface

Calculation Modes: Single point calibration by standard or factor, multipoint calibration with point to point curve fit, multipoint percent absorbance rate standard or factor

Throughput: Reads, calculates and prints results in 3 seconds

Positions: Built in 37°C incubation block with 12 stations

Removable Flow Cell (Reduced Reagent Consumption): No

Minimum Sample Volume: 1 mL for 12 mm tube

Patient Storage Data: Up to 60 tests

Vessels: 12 mm round is standard

Printer: Built-in thermal dot matrix

Display Type: Alphanumeric, 16 character, LCD

Voltage: 110-120/220-240 VAC from 50 to 60 Hz

Dimensions (L x W x H): 24 x 34 x 10 cm

Weight: Approximately 10 lbs (4.5 Kg)